Plumbing

Certification of new equipment

From flow testing at the beginning of the project we also certify newly installed hydrant systems, we conduct a pressure test, a flow test, and a pump appliance test, then an inspection is carried out and a detailed report is provided.

If the hydro static test fails on the first attempt, we DO NOT charge to come out for a retest on the second attempt. We completely understand that no matter how well plans are executed, other factors can compromise and cause a failed test when testing the integrity of the main pipe line.

Repairing leaking hydrants

In many instances the washer inside the hydrant split corrode or at the sign of wear most people tighten the hydrant wheel (alexander wheel) tighter and squash and harden the washer inside and damages the spinal inside which can turn a small preventable job into a a more intensive job.

According to AS2419.1-2012 all hydrant system built after 2012 are suppose to have all the washers replaced and the spindle greased every 5 year intervals, this include the rubber gasket inside the check valve. Which is called a 5-yearly preventative. This will ensure your hydrant is operational in an emergency.

If the hydrant is hard to operate under emergency conditions, hinders operation, maintenance neglected, this could affect the outcome of an insurance claim.

Repairing damaged fire hose reels

Fire hose reels are in some cases used when they are not supposed to and end up leaking due to wear and tear. In some cases fire hose reels are are damaged by accidental collisions such as forklifts.

Fair Fire Services can supply and install new hose reels in place of old ones. We can also carry out installation of new hose reels for extensions, and newly built buildings.

Once a new hose reel is installed we will carry out a certification and provide a detailed inspection report with the flow and pressure. A minimum of 0.33L/S with two of the most disadvantage hose reels flowing is considered a pass, given the installation is carried out correctly.

Backflow prevention and repairs

Fair Fire Services humble beginnings began with backflow prevention. We are affiliated with the Board of Backflow Testers in Victoria which constantly keep us up-to-date with industry knowledge.

Newly installed backflow devices for domestic and fire service by pass meters are required to be tested by South East Water and other councils.

Back flow testable devices:

• RPZ – reduce pressure zone device
• SCDAT – single check testable device
• DCV – Double check valve

Backflow device suppose to be tested every 12 month in accordance with South East Water. For further information please contact us.

Emergency repairs for fire service

We understand that a fire service can be damaged at any time, below and above ground, due to corrosion in the pipe. We can supply our plumbers to assist in isolating the water and assessing the damage.

New installations

Looking to start a project? We are able to provide a quote. Rest assured that Fair Fire Services bring years of knowledge and experience to your project. We are respected experts in the fire industry. We are able to identify your fire saftey requirements and provide solutions.

Contact us for a free non-obligation quote. We will have one of our friendly representatives assist with your enquiry.